Heiniger Shearing Machine Progress, Horse Shearing Machine, with Shearing Blade, cable-bound

The Heiniger Progress shearing machine is delivered including a set of blades for a cutting height of 2-4 mm (horse). The cable-bound Progress horse clipper is characterized above all by its amazingly light weight - it weighs just 930 g. With 2,200 strokes per minute, the built-in motor delivers its power in the Progress from Heiniger. The whole thing happens at just 72 decibels. This means that the Heiniger Progress hardly causes any excitement even for the shyest horse. The low noise level and good performance of the Heiniger Progress were combined with an ergonomic housing design without air leakage. The Progress clipper therefore lies well in the hand and the clipper does not need to worry about ventilation. The Heiniger Progress is therefore a sophisticated, quiet horse clipper for professional use in the stable. The wide shearing blades make the machine ideally suited for full-body shearing.

Instructions for use

• before shearing, remove coarse dirt from the horse's coat
• the horse's coat must be dry before shearing
• to prevent overheating of the blades, oil the clipper blade every 5-10 minutes during shearing
• remove loose hairs from the clipper blade with a cleaning brush during shearing

Technical data

• Motor power: 80 Watt
• Shearing height: 2-4 mm
• Speed: 2,200 double strokes/min
• Sound pressure level: With 70dB(A) very low noise during shearing
• Weight: 900 g
• upper blade: 23 teeth
• lower knife: 21 teeth
• Operating mode: Cable
• Power cable length: approx. 5m

Scope of delivery

• 1 horse clipper PROGRESS
• 1 stand-by case
• 1 blade set
• 1 screwdriver
• 1 Shearing machine oil
• 1 cleaning brush
• 1 manual

Plug

• The clipper is supplied with a C or F plug for 230V mains voltage