Freejump Airbag Vest Kids

The airbag vest by Freejump and is approved according to the NF S72-800-2021 standard. Each airbag is tested individually and has an inflation speed of 98 ms. The airbag should fit close to the body and can be worn over a thin layer of clothing. Clothing to be worn over the airbag vest must also comply with the NF S72-800-2021 standard. Due to the materials used, the airbag fits comfortably against the body and is also breathable. The airbag protects the back, lumbar vertebrae, sacrum, pelvis, thorax, cervical vertebrae and provides optimal neck protection as a cervical support stabilizes the spine and other vital areas. The continuous hip protector guarantees perfect support of the torso alignment. The CO2 capsule must be changed after each deployment. When changing the CO2 capsule, the cartridge is rotated out of the socket. By means of an Allen key, the adapter for attaching the rip cord is opened. The display shows that the adapter is open, as an opening is revealed. The rip cord is placed in the adapter and the new cartridge can then be inserted. You should first make sure that it is a new cartridge. This can be recognized by the weight, as a full cartridge is heavier than an empty one. The cartridge is rotated into the device and finally the adapter is first screwed shut by hand and then securely and tightly closed using the Allen key. You can then tell that the adapter is closed by the sealed opening. If the airbag is registered by Freejump, you get a warranty extension of 2 years.

Note: For the children's sizes S and L only the cartridges in the size 50 cm³ are suitable!

Scope of delivery

• 1 x Freejump Airbag
• 1x matching cartridge
• 1 x attachment strap Saddle Strap 2021
• 1 x rip cord Key Ball Lanyard 2021
• 1 x allen key

Material

• outer fabric: 85 % polyamide, 15 % elastane
• liining: 60 % nylon, 40 % polyester
• airbag: 100 % polyurethane
• breathable
• elastic

Care instructions

• do not machine wash or tumble dry
• hand wash without detergent
• do not dry clean
• do not bleach
• do not iron
• in case of stains, moisten the affected area and rub carefully with a sponge and clean cloth
• leave to dry on a hanger away from heat sources and sunlight
• store away from moisture and sunlight
• do not leave under a windscreen or in a car exposed to direct sunlight
• regular condition checks recommended
• even after the warranty has expired, the waistcoat should be sent for a functional check every 2 years